To see next page click <here>
Name: AdamP
Email: Patten007@hotmail.com
Yamaha: Snowmobile
Year: 2003
Model: sx viper
Manufacturer: Hauck Racing
Other: Others List
Product: clutching
Replaced_or_Modified_to: engine
Remote Name: 206.172.209.179
i am looking to get more bottem end out of my sled, i have a heavy hitter kit and am looking to get a Haulk dual angle helix but dont know that angles would give me the best pull. any sugestions
Name: Rockmeister
Email: hotrock1@comcast.net
Yamaha: Snowmobile
Year: 2005
Model: RX Warrior
Manufacturer:
Other: Others List
Product: Ulmer Racing Front End Bushing Kit
Replaced_or_Modified_to: suspension
Remote Name: 69.1.150.9
This kit worked perfectly. Was an easy install, very cost effective, and solved a major problem with front end bushing wear and play. I know, it sounds like an ad, but it realy does work THAT well.
Name: todd parsons
Email: t.parsons@nf1.sympatico.c
Yamaha: Snowmobile
Year: 2008
Model: nitro
Manufacturer:
Other: Others List
Product:
Replaced_or_Modified_to: engine
Remote Name: 142.162.33.220
it does not hold it rpm
Name: snomodoc
Email: snomodoc@verizon.net
Yamaha: Snowmobile
Year: 2008
Model: apex
Manufacturer: Bender Racing
Other: Others List
Product: clutch kit
Replaced_or_Modified_to: engine
Remote Name: 69.123.110.230
bender clutch kit did not work at all,sled went slower,no gas mileage and reved on trail. I could not get a good answer to my questions and they would never call you back when they said they would.
Name: tracy greenfield
Email: tgree@municipalwellandpum
Yamaha: Snowmobile
Year: 2006
Model: Apex ER
Manufacturer: Other
Other: Others List
Product: Ulmer Racing
Replaced_or_Modified_to: clutch
Remote Name: 75.129.146.39
last season i installed the stage 3 clutching package by Ulmer and wanted to know if there are any secrets to maximize performance results. sled seems to tach out at 10.500 - 10,750 and thought 11 may be better power band. thanks
Name: Craig
Email: cagod25@hotmail.com
Yamaha: Snowmobile
Year: 2005
Model: RX Worrier
Manufacturer:
Other: Others List
Product:
Replaced_or_Modified_to: engine
Remote Name: 216.167.241.206
My father-in-law owns a 2007 Apex GT he wants to know how every one has thier front cliker shocks are set up he has his somewhat soft please let me know thanks.
Name: Fischer
Email: djrockinf@yahoo.com
Yamaha: Snowmobile
Year: 2008
Model: Nytro
Manufacturer: Other
Other: Others List
Product: Turbo
Replaced_or_Modified_to: engine
Remote Name: 69.146.12.130
Installed a stage 1 turbo kit from Northwest Turbo works. Installed in 4 hours, no cutting. 190hp at 5psi boost I have about 100 miles on it so far, runs awesome
Name: kevin kimball
Email: kkimball@lessorsinc.com
Yamaha: Snowmobile
Year: 2003
Model: RX1
Manufacturer:
Other: Others List
Product: clutching
Replaced_or_Modified_to: clutch
Remote Name: 63.225.151.142
better performance
Name: frank
Email: frankplourde1971@hotmailm
Yamaha: Snowmobile
Year: 2006
Model: nitro
Manufacturer:
Other: Others List
Product:
Replaced_or_Modified_to: clutch
Remote Name: 24.226.139.12
Name: fridgie
Email: ipo1tras@mts.net
Yamaha: Snowmobile
Year: 2007
Model: attak
Manufacturer:
Other: Woody
Product: airwave suspension
Replaced_or_Modified_to: suspension
Remote Name: 207.161.151.137
If you are going to ride this sled aggresively this is the only way to go.Cruise the rough stuff at 80 MPH. Takes this sled off the groomed trail and ride where you want to. Unbeleiveable.....
Name: Turk5
Email: turk5@serbernet.com
Yamaha: Snowmobile
Year: 2004
Model: viper mtn
Manufacturer: Bender Racing
Other: Others List
Product: triple exhaust pipes
Replaced_or_Modified_to: exhaust
Remote Name: 74.214.139.78
Would like jetting and clutching specs to run at 2000ft
Name: Kasey Janzen
Email: kcauto@cogeco.net
Yamaha: Snowmobile
Year: 2006
Model: Attak
Manufacturer: Bender Racing
Other: Others List
Product: simons cpr racing turbo
Replaced_or_Modified_to: engine
Remote Name: 208.114.152.12
An unbelieveable kit. Installed it myself. Have 450 trail ridden miles already. Not a glitch. Blows away all my friends sleds. Get 13 miles per us gallon. What a great bolt on.
Name: Mike Boland
Email: amandaboland@sympatico.ca
Yamaha: Snowmobile
Year: 2008
Model: FX NITRO RTX 40TH
Manufacturer:
Other: Others List
Product:
Replaced_or_Modified_to: engine
Remote Name: 74.14.0.185
EXHAUST AND CLUTCH KIT
Name: Tom Konkin
Email: konkins@loretel.net
Yamaha: Snowmobile
Year: 2007
Model: APEX RTX
Manufacturer: Other
Other: Others List
Product:
Replaced_or_Modified_to: engine
Remote Name: 216.239.14.35
Stage 2 mpi blower, special thanks to kyle at 2k powersports who built the engine, J E low comp pistons Falicon supercrank and knife rods. she rocks
Name: scott
Email: rbr1127@yahoo.com
Yamaha: Snowmobile
Year: 2001
Model: vmax700dlx
Manufacturer: Bender Racing
Other: SLP
Product: carbon fiber reeds
Replaced_or_Modified_to: engine
Remote Name: 74.202.55.2
are spacers needed when installing reeds
Name: jason weller
Email: jodiw@hickorytech.net
Yamaha: Snowmobile
Year: 01
Model: srx
Manufacturer: Bender Racing
Other: Others List
Product: cold air kit
Replaced_or_Modified_to: engine
Remote Name: 64.254.191.169
nice kit cant remember which side the big jet goes on 2 jets are same 1 is bigger anybody know pto side or mag side
Name: danny
Email: d6@jfkfghsdlsdt
Yamaha: Snowmobile
Year: 2002
Model: viper
Manufacturer: Hauck Racing
Other: Others List
Product: silencers
Replaced_or_Modified_to: exhaust
Remote Name: 71.82.213.30
Name: Brent
Email: bgrimes7716@comcast.net
Yamaha: Snowmobile
Year: 1986
Model: Enticer 340 K
Manufacturer:
Other: Others List
Product:
Replaced_or_Modified_to: suspension
Remote Name: 69.243.176.138
Need help adjusting rear suspension
Name: Darrell
Email: purdom1@comcast.net
Yamaha: Snowmobile
Year: 1995
Model: V-max 600
Manufacturer:
Other: Others List
Product: 1995 V Max mods
Replaced_or_Modified_to: clutch
Remote Name: 68.61.75.192
Need help in Clutching a 1995 V-max 600
Name: frizz
Email: mvtech@accesswave.ca
Yamaha: Snowmobile
Year: 2003
Model: sx viper
Manufacturer:
Other: Others List
Product:
Replaced_or_Modified_to: engine
Remote Name: 24.222.243.130
I HAVE A STOCK 03 VIPER I WEIGH 150 LBS HOW DO I GET IT TO HOOKUP OFF THE LINE BETTER
Name: Daryl White
Email: darylwhite@hotmail.com
Yamaha: Snowmobile
Year: 2002
Model: viper
Manufacturer: Other
Other: Others List
Product: rumblepack
Replaced_or_Modified_to: exhaust
Remote Name: 142.166.241.133
worksgreat
Name: tuck ewing
Email: ewing1984@msn.com
Yamaha: Snowmobile
Year: 2000
Model: mm700
Manufacturer: Hauck Racing
Other: Others List
Product:
Replaced_or_Modified_to: exhaust
Remote Name: 76.27.15.230
i was wondering if the sx 600 700 gasket mod will work on a 2000 mountain max 700 anyone done this let me know thanks
Name: kurt jewer
Email: kurtj-11@hotmail.com
Yamaha: Snowmobile
Year: 1990
Model: Phazer 2
Manufacturer:
Other: Others List
Product:
Replaced_or_Modified_to: engine
Remote Name: 142.163.83.166
she is the bomb put when i skipp water she bobs how do i get her to stop bobbing
Name: Geoff McDunnah
Email: gmmcdunnah@yahoo.com
Yamaha: Snowmobile
Year: 2001
Model: srx700
Manufacturer:
Other: Others List
Product: bars
Replaced_or_Modified_to: engine
Remote Name: 165.236.200.99
Lookin for drag bars for my srx
Name: C Craig
Email: gdL480386409Jd.com
Yamaha: Snowmobile
Year: 2002
Model: SRX700G
Manufacturer: Other
Other: Camoplast
Product: Track
Replaced_or_Modified_to: engine
Remote Name: 199.101.6.247
Installed a 1 250 Camoplast Rip Saw track What a huge difference A must do modification
Name: Chris
Email: blackhatch@hotmail.com
Yamaha: Snowmobile
Year: 2005
Model: RS Vector
Manufacturer:
Other: Others List
Product: Heavy Hitter
Replaced_or_Modified_to: clutch
Remote Name: 142.163.198.104
Installed clutch weights at the weekend makes the Vector really wake up and go
Name: tylor
Email: stoodley-90@hotmail.com
Yamaha: Snowmobile
Year: 2001
Model: mtn max
Manufacturer:
Other: Others List
Product:
Replaced_or_Modified_to: suspension
Remote Name: 142.162.177.228
i have tried every thing with this sled to make it faster and nothing will work any ideas for me then please e-mail me
Name: tylor
Email: stoodley-90@hotmail.com
Yamaha: Snowmobile
Year: 2001
Model: mountain max
Manufacturer:
Other: Others List
Product: boysen reeds
Replaced_or_Modified_to: engine
Remote Name: 142.162.177.228
sled so slow need to speed it up
Name: rocket
Email: rocketandlou97@shaw.ca
Yamaha: Snowmobile
Year: 06
Model: attak
Manufacturer:
Other: Camoplast
Product: 1.5 intense track
Replaced_or_Modified_to: traction/track
Remote Name: 24.66.94.144
this track works awsome on this sled with the proper clutching
Name: blumagoo
Email: marcusmcgough@yahoo.com
Yamaha: Snowmobile
Year: 2000
Model: srx700
Manufacturer: Hauck Racing
Other: Others List
Product: Stage 3 clutch kit
Replaced_or_Modified_to: clutch
Remote Name: 74.135.116.205
Just got the clutch kit from Hauck Has anyone used this kit if so what kind of gains were noticed Did it slow it down at all
Name: Ambrose
Email: dpambros@mtu.edu
Yamaha: Snowmobile
Year: 2004
Model: SXVenom
Manufacturer: Hauck Racing
Other: Others List
Product: Pipes
Replaced_or_Modified_to: exhaust
Remote Name: 24.247.42.190
these pipes really made my sled come alive throughout the powerband
Name: steph
Email: patoutela@hotmail.com
Yamaha: Snowmobile
Year: 99
Model: phaser
Manufacturer:
Other: Others List
Product: skis
Replaced_or_Modified_to: body/skis
Remote Name: 64.25.170.251
i put some plastic skis on my phazer and it handle like a dream
Name: steph
Email: patoutela@hotmail.com
Yamaha: Snowmobile
Year: 99
Model: phazer 500
Manufacturer: Other
Other: Others List
Product: weight transfer bar
Replaced_or_Modified_to: suspension
Remote Name: 64.25.170.251
this is the best mod you can put on the pro action chassi it give you traction and is fully ajustable
Name: Jormaha
Email: jormaharx1@hotmail.com
Yamaha: Snowmobile
Year: 2004
Model: RX-1
Manufacturer: Maxximum Performance
Other: Others List
Product: Exhaust
Replaced_or_Modified_to: engine
Remote Name: 66.186.92.46
I would not recommend to buy this exhaust to anyone The pipes that run down the length of the seat are made very poorly It does sound nice but it took me alot of time to get them into my sled I kept them in my sled for two weeks and then took them out and had them modified so they fit into the sled like the stock exhaust NOW I figured that the exhaust was made for the RX-1 that they would fit but not the case A TOTAL PAIN IN THE ASS
Name: hdfred
Email: hdfred@aspencustomcycle.c
Yamaha: Snowmobile
Year: 1997
Model: Mountain Max
Manufacturer:
Other: Others List
Product: mountain performance
Replaced_or_Modified_to: suspension
Remote Name: 64.92.130.103
I love my sled Mountain Performance tunnel and billet heads Its got a elkohm tunnel with a 144 camoplast billet heads psi triple pipes reed spacers carbon fiber reeds and a whole lot of fine tuning to the clutches and carbs This sled pulls so hard and climbs out of just about anything I can get in 0 70 in 5 secs top speed over 105 at 9000 feet hdfred at aspencustomcycle dot com
Name: Leegholt
Email: Leegholt@yahoo.com
Yamaha: Snowmobile
Year: 2002
Model: SXVIPER
Manufacturer: Hauck Racing
Other: Others List
Product: upper gear
Replaced_or_Modified_to: chain case
Remote Name: 66.41.30.215
I want to drop my upper gear two teeth Do I need to replace the chain
Name: Jim Kennedy
Email: Woodchk502@yahoo.com
Yamaha: Snowmobile
Year: 2003
Model: RX-1
Manufacturer: Hauck Racing
Other: Others List
Product: Launching weights
Replaced_or_Modified_to: clutch
Remote Name: 207.74.255.252
The replacement of the stock ramps with the ones from Hauck and the addition of 240 1.175" woodys studs its a totally different snowmobile. Much better than my friends Heel Clicker or Heavy Hitter setup.
Name: Sxracer
Email: moonlake60012@yahoo.com
Yamaha: Snowmobile
Year: 2003
Model: viper
Manufacturer:
Other: Power INC.
Product: power inc. race pipes
Replaced_or_Modified_to: exhaust
Remote Name: 138.87.133.116
I would like to know if I could run these on my 03' 700 viper. I ran them on a 97 & 01 SxR700 and want to try them on the Viper. Has anyone done this? These pipes create huge power, but are a little to loud. Let me know please.
Name: 4Fighter
Email: @yahoo.com
Yamaha: Snowmobile
Year: 2004
Model: RX-1
Manufacturer: Other
Other: Others List
Product: Tunnel/Rail extensions
Replaced_or_Modified_to: suspension
Remote Name: 24.180.206.4
Ohlins Rear Clicker MPI Tunnel Extension (Warrior Update kit) Tracks USA Rail Extensions 136" Camoplast Ripsaw Ohlins: Expensive, Very stiff setup for aggresive riding. Can be extremely harsh - recommend softer spring calibration from Pionneer Performance. Tunnel kit: Very good quality, complete instructions, killer decal. Rail Ext. Excellent quality, extends hifax, press-fit, strong, no instructions - requires a little modification with a file. Excellent upgrade for hole-shot, top-end stability, ride quality, and flat-land deep snow flotation, as well as improving the overall look of the RX-1 and added leverage for lifting the rear of the sled. Add an Ohlins rear clicker (get a softer spring setup from Pioneer Performance) and you have nearly all the benefits of the Warrior (excl. gearing/clutching) Highly recommend re-inforcing W-arm.
Name: Lee Harris
Email: broncoguy@networks4u.com
Yamaha: Snowmobile
Year: 2005
Model: rage
Manufacturer:
Other: Others List
Product:
Replaced_or_Modified_to: engine
Remote Name: 65.175.161.6
I have a clonking under my stock sled they say is noarmal Icant stand it what can i do thaks Lee Isuck at typeing
Name: keith rooney
Email: rockinroon@msn.com
Yamaha: Snowmobile
Year: 89,95
Model: v excitement
Manufacturer:
Other: Others List
Product: v max exciter
Replaced_or_Modified_to: engine
Remote Name: 156.34.164.14
dropped the lazy piston port 580 60hp and instaulled a 105hp 95 vmax 600 reed valve propellant .dropped 135lbs off the v and run a 3' narrower rocket hang on cant describe the excitement!
Name: Robban
Email: robert0magnstrom@hotmail.
Yamaha: Snowmobile
Year: 2004
Model: Viper
Manufacturer: Bender Racing
Other: Others List
Product: Bender Pipes & modified Bender clutch kit
Replaced_or_Modified_to: engine
Remote Name: 193.45.231.60
Modified Benders own clutchkit: Replaced the 8-EK, standard, weights with 8-AX,weights (V-max 4). The sec.spring is Yamahas silver, 90 deg. Itīs much better than Benders own kit, for trailriding anyway. Witk the Benderkit the Viper felt like a dragracer with very bad backshift.
Name: Dan Pahlke
Email: DPahlke2003@hotmail.com
Yamaha: Snowmobile
Year: 2001
Model: sx500r
Manufacturer:
Other: Others List
Product:
Replaced_or_Modified_to: exhaust
Remote Name: 205.213.111.51
i have a 2001 sx500r and i was wondering if there is any silencers or...something to make it louder...
Name: Larry Born
Email: lfborn@netcape.com
Yamaha: Snowmobile
Year: 2001
Model: SXR 700
Manufacturer:
Other: Woody
Product: Dooly Carbide
Replaced_or_Modified_to: body/skis
Remote Name: 172.162.22.57
I have ben rideing yamahas for the last 20+ years the best mod you can do to a yamaha is put on these doolys there is no way any sled should be on the trails without them . I have tried everything .This is the best thing ever, It completely elimanates all darting ,hunting ,You will never buy another single carbide .
Name: garyviper
Email: drew71@pivot.net
Yamaha: Snowmobile
Year: 04
Model: viper
Manufacturer:
Other: Others List
Product: speedwerx
Replaced_or_Modified_to: exhaust
Remote Name: 66.231.216.42
istalled speedwerx pipes on 04 viper and slowed the sled down 10mph good out of the hole and mid range but falls on its face on top end. istalled162.5 mains and had the head cut to equal compression.Used 51/45 helix with silver in secondary.used stock spring on primary and took rivot out of inside weights turning 8900rpm.unhooked deto light helped a little but stock viper will go bye on top end and a vmax700sx with 8700 miles on it will to. any help?
Name: slimted
Email: slimseven@hotmail.com
Yamaha: Snowmobile
Year: 1997
Model: vmax700sx
Manufacturer:
Other: Others List
Product:
Replaced_or_Modified_to: engine
Remote Name: 209.165.134.49
i need some help on beating a xcr 700 triple
Name: kenny
Email: mopar1rules@hotmail.com
Yamaha: Snowmobile
Year: 1999
Model: srx
Manufacturer: Other
Other: Others List
Product: race silencer
Replaced_or_Modified_to: exhaust
Remote Name: 205.213.111.51
Not as much of a performance difference as what a bender can has.
Name: John
Email: jwsalmon@wowway.com
Yamaha: Snowmobile
Year: 1998
Model: SRX 700S
Manufacturer: Maxximum Performance
Other: Others List
Product: Heads, M-10 w/olins, Ripsaw,
Replaced_or_Modified_to: engine
Remote Name: 69.14.3.170
I've made a few modifications to my 98 SRX including: M-10 and Ripsaw Track with 8 tooth driver and geared back to stock to 37/23 gears. Wonderful combination! Heads with inserts, Bender clutch kit, carbon fiber reeds, and rejetted with Maxximum Exaust Cannister. Cleaned up throtle response and corner to corner acceleration. Not as hot a clutch set-up as heel clicker, but was a significant improvement over stock.
Name: Shawn
Email: spatey@crrstv.net
Yamaha: Snowmobile
Year: 2003
Model: RX-1 LE
Manufacturer: Other
Other: Others List
Product: simmons flexi-skis
Replaced_or_Modified_to: body/skis
Remote Name: 142.163.60.160
This sled was all over the trail until I installed a pr.of simmons flexi-skis.The differance, NO SKI LIFT IN THE CORNERS. Tracking down the trail straight and true. Installed 10 tooth drivers, 5 mph gain on the radar. 3 T.P.I. low boys on the intake for warmer days.Replaced the stock track with a 1" staggered paddle to hook up a 121" without loosing mph. Trying to get the Hammer time heel clicker weights working to my satification.
Name: BROCK
Email: avsmHOTMAIL.COM
Yamaha: Snowmobile
Year: 1999
Model: SX
Manufacturer:
Other: Others List
Product: 22 /40
Replaced_or_Modified_to: chain case
Remote Name: 207.134.205.207
BOYESON REED VALVES ARE THE BEST
Name: mychael v
Email: mveracing@hotmail
Yamaha: Atv
Year: 2005
Model: yfz450
Manufacturer:
Other: SLP
Product:
Replaced_or_Modified_to: engine
Remote Name: 63.24.58.38
Name: rob markus
Email: robmarkus@shaw.ca
Yamaha: Snowmobile
Year: 2001
Model: mm700
Manufacturer:
Other: Others List
Product:
Replaced_or_Modified_to: body/skis
Remote Name: 24.67.253.204
for you guys out there who wonder if the 2005 rx1 mountain skis will work on the mm700, they bolt right on.you can even use your old hooks, just have tocut the front mounting boss off and drill two holes to secure the mm700 hooks,will have to purchase rx1 runners though as the mounting holes are different.
Name: Dan Williams
Email: danw66@sbcglobal.net
Yamaha: Snowmobile
Year: 2003
Model: R-X 1 LTD
Manufacturer: Bender Racing
Other: Woody
Product:
Replaced_or_Modified_to: engine
Remote Name: 68.73.6.204
Ive done several chsnges this year,White Knuckle to Bender exhaust,green carb springs,K&Ns w/prefilters,Heavy Hitters clutch kit,plus jetting. yhe sled is the best i have ever had. Rode CATS for 22yrs before switching .
Name: Howard McCollister
Email: hmac@charter.net
Yamaha: Snowmobile
Year: 2002
Model: Viper
Manufacturer: Bender Racing
Other: Others List
Product: Triple pipes
Replaced_or_Modified_to: exhaust
Remote Name: 216.70.8.194
From a performance standpoint, installing Bender triples with their associated jetting and clutching changes makes a rather astonishing difference in performance. The sled still has a very useable power band and I don't perceive and flat spots. I also added Boysen reeds and a 1.25 inch Camoplast. As part of the pipe installation, I did all the other things Bender recommends including the rear heat exchanger and Opticool head gasket. From an installation standpoint, the pipes are kind of a bugger. It's a two person job, and I think the most valuable tool for the installation is a rubber mallet. When I bought the pipes, the included some teflon tape to protect some of the wiring and exhaust valve cabling. It doesn't work. Even though we routed the cables correctly, they are close enought to the pipes that I had two of them burn through and had to be replaced. I solved that issue by getting some rather expensive foil covered insulating tape and slapping on large quantities on various components under the hood. So far so good. Thepipes require a hood hinge modification, and that works fine ...really isn't noticeable. One issue was jetting. Every time I ever called Bender for jetting and/or clutching altitude recommendations, they told me that they hadn't completed altitude testing and couldn't help me. Fortunately, they referred me to Mountain Performance who were extremely helpful and provided me with everything I needed. Great people. All-in-all, those Bender pipes really provide an amazing bolt-on power increase. But installation is a little difficult, and I think there are some engineering aspects that are a little on the rough side. H McCollister
Name: Kraig
Email: waldokat5@aol.com
Yamaha: Snowmobile
Year: 1984
Model: SS440
Manufacturer:
Other: Others List
Product:
Replaced_or_Modified_to: suspension
Remote Name: 64.12.116.130
Can somebody tell me which suspension components & what year to use to give my SS somemore travel?
Name: deane
Email: alienz7595@hotmail.com
Yamaha: Snowmobile
Year: 1997
Model: mountain max 600
Manufacturer:
Other: Others List
Product:
Replaced_or_Modified_to: suspension
Remote Name: 209.193.29.23
im haveing problems with this machine when ever i have it sitting out side and i go out to run it it doesnt like to go past 4000rpm with out bogging down and then dieing. however if i put it inside and let it warm up for a day it runs just fine for a couple of hours. any one have any idea of whats going on please e-mail me and help me out because its got me.
Name: rx1_05
Email: bobthat05@hotmail
Yamaha: Snowmobile
Year: 2003
Model: RX1
Manufacturer: Hauck Racing
Other: Others List
Product: GHT-R-DUN exhasust silencer
Replaced_or_Modified_to: exhaust
Remote Name: 69.39.92.128
this thing sounds awesome if anybody wants there rx1 too sound like a r1 street bike and also gain 7 -9 horsepower this is the thing too buy! email address is bobthat_05@hotmail.com
Name: Mike Lounsbury
Email: mandalounsbury@aol.com
Yamaha: Snowmobile
Year: 2003
Model: Yamaha RX-1
Manufacturer:
Other: Others List
Product: Heavy Hitters
Replaced_or_Modified_to: clutch
Remote Name: 205.188.117.12
I put a set of Heavy Hitters and a K&N Filters.It made a world of difference in my sled. I am so happy with my sled i dont think i could ever go back to a 2 Stroke.My next thing to get is the QC-1 or the GP-1 exhaust. I deal with Matt at the speed shop. He has been so helpful. A pleasure to deal with. www.thespeedshop1.com. You wont be disappointed.C-YA
Name: Ron house
Email: ron@go-fast.net
Yamaha: Snowmobile
Year:
Model: rx-1
Manufacturer:
Other: Others List
Product: evac
Replaced_or_Modified_to: engine
Remote Name: 66.202.24.55
bought evac thur action motorsports in syracuse ny made my low end speed increase by 50%. this is the cheapest way i have found to make huge gains in performance.
Name: Robert
Email: chillin14@hotmail.com
Yamaha: Snowmobile
Year: 2003
Model: Mtn Viper 786
Manufacturer: Other
Other: PSI
Product:
Replaced_or_Modified_to: engine
Remote Name: 24.237.136.78
my sled has a 786 big bore that i picked up at crazy mountain performance. I also put triple PSI pipes with k&n air filters. Also has a boondocker nitrous system with custom LED lights under the sled just for the cool look. Sled is extremely fast and dosent like the nitrous to well i used it 3 times and siezed the motor but i just rebuilt it. The speedo says 157 but i dont know what the radar speed is yet. Thats on hard pack.
Name: FASTER
Email: 1222ATAWL.COM
Yamaha: Snowmobile
Year: 2001
Model: SRX
Manufacturer: Hauck Racing
Other: Others List
Product: CLUTCH PARTS
Replaced_or_Modified_to: clutch
Remote Name: 24.39.36.178
Name: YAMAHAULER
Email: ryansopersbcglobal.net
Yamaha: Snowmobile
Year: 2001
Model: srx700
Manufacturer: Hauck Racing
Other: Others List
Product: clutch
Replaced_or_Modified_to: exhaust
Remote Name: 68.78.16.54
Hauck#4 clutch kit with can,Speed ring geared down 2 teeth,Maximum rods,192 studs for trail,chisels to go play on the ice,really rocks
Name: CENTRAL
Email: centsled@telusplanet.net
Yamaha: Snowmobile
Year: 05
Model: rs vector
Manufacturer:
Other: Others List
Product:
Replaced_or_Modified_to: engine
Remote Name: 209.89.131.223
looking for feed back on 2005 rs vectors
Name: Michael
Email: mandalounsbury@aol.com
Yamaha: Snowmobile
Year: 2003
Model: RX-1
Manufacturer:
Other: Others List
Product: Heavy Hitters ECP filters
Replaced_or_Modified_to: clutch
Remote Name: 152.163.100.130
This is one RX1 that makes the Mach Z look like grandmas grocery getter............
Name: GLENN
Email: glenmartin123@aol.com
Yamaha: Snowmobile
Year: 2004
Model: WARRIOR
Manufacturer:
Other: Others List
Product:
Replaced_or_Modified_to: clutch
Remote Name: 64.12.116.130
IS THERE ANYTHING OUT THERE TO GET MORE BOTTOM AND TOP END, WE NEED TO SPEED THIS PUPPY UP TO STAY AHEAD OF A F7 , ANY COMMENTS OR IDEAS WOULD BE GREAT PLEASE EMAIL US THANKS
Name: Steve
Email: sriddle@aero.und.edu
Yamaha: Snowmobile
Year: 1998
Model: 600 sx
Manufacturer:
Other: Others List
Product:
Replaced_or_Modified_to: suspension
Remote Name: 134.129.221.160
can anyone tell me if a 99 mountain max suspension will fit on my standard 98 vmax sx. I have found one and want to confirm that it does before purchasing.
Name: robert
Email: none@aol.com
Yamaha: Snowmobile
Year: 2003
Model: rx1
Manufacturer:
Other: Others List
Product:
Replaced_or_Modified_to: engine
Remote Name: 12.210.134.125
Name: robert
Email: none@none.com
Yamaha: Snowmobile
Year: 2003
Model: rx1
Manufacturer:
Other: Others List
Product:
Replaced_or_Modified_to: engine
Remote Name: 65.42.108.117
Name: Larry Lajeunesse
Email: ppl@vianet.on.ca
Yamaha: Snowmobile
Year: 1997
Model: sx700 v-max
Manufacturer:
Other: Power INC.
Product:
Replaced_or_Modified_to: clutch
Remote Name: 66.186.95.3
Clutch kit. Helix,Power inc pipes,1 inch track from rx1 with 144 studs,Does 109 mph in 2000 ft track. Rx1 track makes big difference in snow lots of pull. Haven't used my helix yet don't know how to set/up hope to find out from someone what settings to use #'s wise for helix on radar runs. Other wise sled rocks!!
Name: rejean lacourse
Email: rejeanl49@hotmail.com
Yamaha: Snowmobile
Year: 2003
Model: rx1
Manufacturer: Other
Other: Holtzman
Product: air filter
Replaced_or_Modified_to: carburation
Remote Name: 64.228.246.113
do you have some modification for more hp,ex: air box ,air filter kit,electronique box,and dyno shet for result tank you rejean
Name: buzzbug
Email: buzzbug@juno.com
Yamaha: Snowmobile
Year: 1997
Model: v-max xtc
Manufacturer:
Other: Others List
Product:
Replaced_or_Modified_to: engine
Remote Name: 63.165.168.73
sled has always lost power in the powder.fine on top end but will (load up) loose power in mid-range. there has been no clutching work or re-gearing. sle rejetted with thinner head gasket. any advice would be greatly appreciated. please e-mail at buzzbug@juno.com
Name: Kyle F
Email: ibanezrock04@gmail.com
Yamaha: Snowmobile
Year: 1997
Model: Mountain Max
Manufacturer:
Other: Others List
Product: Stinger Tirpple Pipes
Replaced_or_Modified_to: exhaust
Remote Name: 142.32.208.238
They are sweet, I recomend getting them. They boosted my dods sled to 130 HP. If u want pics, just email me. I check the mail everyday
Name: davel
Email: davejeers@msn
Yamaha: Snowmobile
Year: 2003
Model: rx-1
Manufacturer: Maxximum Performance
Other: Others List
Product: clutch
Replaced_or_Modified_to: suspension
Remote Name: 70.104.44.156
Name: BOB DAVIS
Email: bobdavis700@hotmail.com
Yamaha: Snowmobile
Year: 2002
Model: SRX 700
Manufacturer:
Other: Others List
Product: MOUNTAIN PERFORMANCE
Replaced_or_Modified_to: traction/track
Remote Name: 142.163.148.209
HELLO FELLO BLUE TRAVELLERS, I WAS WONDERING IF ANYONE HAS TRIED EXTENDING A 2002 SRX TO 144" USING THE KIT FROM MOUNTAIN PERFORMANCE. I AM STRONGLY CONSIDERING IT AND WANT TO HEAR FROM SOMEONE WHO HAS DONE IT AND WOULD ALSO APPRECIATE IT IF SOMEONE WOULD SHARE PICTURES OF THEIR END RESULT. IS IT GOOD AR IS IT NOT. PLEASE LET ME KNOW. THANKS. BOB
Name: Carbco
Email: carbco@worldnet.att.net
Yamaha: Snowmobile
Year: 2003
Model: RX-1mtn
Manufacturer:
Other: Others List
Product: ECP Intake kit
Replaced_or_Modified_to: carburation
Remote Name: 12.73.21.160
Installed the ECP air filter kit with prefilters. What a difference! Just love it and also installed a shutoff valve (ball check) in the coolant line to carbs. Keeps the fuel cool in the carbs. Had to jet up to 55's and also added the Yamaha aftermarket heat exchanger and simmons skis. Adjusted the skid and like the way it handles now at least for me. Can pull the front off the snow at 40mph now. Still too heavy but will ride it this way. No problems with any part of the sled. Would recommend the ECP (Eastern Cycle Performance) air filter setup to any 4 banger owner.
Name: zack parker
Email: 610190764@cortlandcitysch
Yamaha: Snowmobile
Year: 1998
Model: srx 700
Manufacturer:
Other: Others List
Product: yamaha
Replaced_or_Modified_to: engine
Remote Name: 170.158.3.254
i think that mine has a lot of power
Name: Jeffery Wilson
Email: wilco@gwi.net
Yamaha: Snowmobile
Year: 1999
Model: SRX
Manufacturer: Other
Other: Others List
Product:
Replaced_or_Modified_to: engine
Remote Name: 216.195.154.229
Name: Kris Krutz
Email: kris12302@yahoo.com
Yamaha: Snowmobile
Year: 2002
Model: srx
Manufacturer: Bender Racing
Other: Others List
Product:
Replaced_or_Modified_to: engine
Remote Name: 24.194.108.35
bender ported, hauck muffler, V-force 3 reeds, Bender cold air kit, Bender Transfer rods..Bender heel clicker clutch kit. Bender jet kit.....Everyhing I have done to the sled has really worked!
Name: Jason Kressin
Email: snowdenma@hotmail.com
Yamaha: Snowmobile
Year: 02
Model: Viper
Manufacturer:
Other: Others List
Product: Shock re-valve, Team clutch
Replaced_or_Modified_to: clutch
Remote Name: 24.247.78.96
I liked the results of the re-valve from Pioneer Performance. The team rolled pulls very hard and back-shifts flawlessly. I would suggest them to anyone.
Name: steve fortuna
Email: fixcarsrus@yahoo.com
Yamaha: Snowmobile
Year: 2002
Model: venture 700
Manufacturer: Hauck Racing
Other: SLP
Product:
Replaced_or_Modified_to: engine
Remote Name: 207.230.192.224
hauck roller secondary, maxximum head ,boysen rad valve,thunder shift kit.olins rear socks ,works front .ex pipe spacer, tepa flow , microlon treated, worke great ride is unreal copared , to stock 17mpg simmons fex ski
Name: Jason
Email: ozzie321@localnet.com
Yamaha: Snowmobile
Year: 2002
Model: Viper ER
Manufacturer:
Other: SLP
Product: Triple Pipes
Replaced_or_Modified_to: exhaust
Remote Name: 12.110.132.194
I didnt care for the performance of the viper with the stock exhaust system. I have installed the SLP triple exhaust system and i rejetted the carb. The sled is pretty fast and i really like it alot now.
Name: Jon Podgorski
Email: podgorskiy@aol.com
Yamaha: Snowmobile
Year: 2002
Model: Yamaha Viper
Manufacturer: Other
Other: SLP
Product: Slp pipes
Replaced_or_Modified_to: exhaust
Remote Name: 205.188.116.133
The pipes work great Iused my own clutch set up and I can run right with the rx1.
Name: Arthur Coelho
Email: arthurcoelho@hotmail.com
Yamaha: Snowmobile
Year: 2004
Model: RXWarrior
Manufacturer:
Other: Others List
Product:
Replaced_or_Modified_to: clutch
Remote Name: 24.202.183.208
How to get maximmun take off speed and top speed Thank You
Name: John DiMeglio
Email: john.dimeglio@franke.com
Yamaha: Snowmobile
Year: 2004
Model: rx-Warrior
Manufacturer:
Other: Others List
Product: stock
Replaced_or_Modified_to: engine
Remote Name: 204.210.148.47
Name: Robert
Email: robert0magnstrom@hotmail.
Yamaha: Snowmobile
Year: 2004
Model: viper
Manufacturer: Bender Racing
Other: Others List
Product: vip pipes
Replaced_or_Modified_to: engine
Remote Name: 193.45.225.230
Hello! I wonder if anyone can give me some information about cluthing ?? Is benderīs own clutch-kit the best or is there anyting else to do?
Name: scott fullmer
Email: wigwag@telusplanet.net
Yamaha: Snowmobile
Year: 2003
Model: RX1
Manufacturer:
Other: Others List
Product: spindles
Replaced_or_Modified_to: suspension
Remote Name: 198.53.114.196
Need New Spindles For RX1 what is there?
Name: jerome
Email: tweety28203@yahoo.ca
Yamaha: Snowmobile
Year: 97
Model: sx vmax
Manufacturer:
Other: Others List
Product: thunder shift kit
Replaced_or_Modified_to: clutch
Remote Name: 156.34.232.85
i like to know how and what would be the best setup for my sx 700 clutch i have a thunder shift kit just want to know the best setup is thx. jerome
Name: sledman
Email: cnylock@msn.com
Yamaha: Snowmobile
Year: 99
Model: srx
Manufacturer: Hauck Racing
Other: Others List
Product:
Replaced_or_Modified_to: engine
Remote Name: 65.149.176.35
sled bought tthis sled has hauck big bore please email any help to set this up to work propely.
Name: YAMAMAN
Email: JWENDALLPIKE@YAHOO.COM
Yamaha: Atv
Year: 2003
Model: GRIZ
Manufacturer:
Other: Others List
Product:
Replaced_or_Modified_to: engine
Remote Name: 66.41.232.77
WHAT CAN I DO TO THE SECONDARY ON MY 03 GRIZ? I ALREADY PUT PRIMARY WEIGHTS FROM A KODIAC IN IT. BUT THAT KAW PRARIE 650 STILL WAXES ME. ANY IDEAS?
Name: Trane Racer
Email: rdbowell@yahoo.com
Yamaha: Snowmobile
Year: 04
Model: Warrior
Manufacturer:
Other: Others List
Product: Simmons Flexi Ski
Replaced_or_Modified_to: engine
Remote Name: 24.237.140.70
Hey Guys! So Far the Flexi skis are fine with the exception of the rattling caused by the slip joint of the grab loop. They do float better than stock skis but not better than wider skis. I have experienced some mild darting but have not tuned the skid frame yet so less/more weight on the skis may have an affect. I also have Ohlins shocks, just on the front, because of the new shock in the back with all the adjustment range. As far as the Ohlins are concerned, good or bad, they just look so damn nice on this sled. I'm waiting till '05 when 9" aluminum wheels will be on the market, for the skid frame mods. My big question is: Has anyone installed the Dimond Drive yet, and if so .... spill the beans please.
Name: angelo delzotto
Email: herbito@msn.com
Yamaha: Snowmobile
Year: 2003
Model: sxviper
Manufacturer: Bender Racing
Other: Others List
Product: pipes and clutch
Replaced_or_Modified_to: engine
Remote Name: 208.247.100.130
woke the viper right up----excellent topend and no problems so far---2200 miles
Name: Coady Grant
Email: coadyg@durhamconca
Yamaha: Snowmobile
Year: 02
Model: Viper
Manufacturer: Bender Racing
Other: Others List
Product: pipes, clutch kit
Replaced_or_Modified_to: exhaust
Remote Name: 192.197.54.136
Fastest trail sled i ever owned, yet can still smoke all those RX1's on the lake. Gained on bottom and top end. Lots of power in a light sled equals fast trail sled and faster lake rocket!
Name: reddog986 mmax 700
Email: www.reddog9862000@yahoo.c
Yamaha: Snowmobile
Year: 2001
Model: mmax 700
Manufacturer:
Other: Others List
Product:
Replaced_or_Modified_to: clutch
Remote Name: 142.177.93.22
i put a heelclicker kit,air box mod,head gasket mod droped to a 20 on top,and drilled the mufler, this realy brang this sled alive i love my mmax
Name: Mark Z
Email: hotrodd261@hotmail.com
Yamaha: Snowmobile
Year: 00
Model: SRX
Manufacturer: Other
Other: Others List
Product: traction
Replaced_or_Modified_to: traction/track
Remote Name: 12.26.224.131
Anyone know how to make these transfer some decent weight? My old ZRT600 smokes the doors off this thing off the line. If anyone can help email me - thanks
Name: mike leary
Email: rxwarrior@netzero
Yamaha: Snowmobile
Year: 2004
Model: warrior
Manufacturer:
Other: Others List
Product:
Replaced_or_Modified_to: engine
Remote Name: 64.223.153.159
Anyone thinking about studding the 136" think again I ran 162 1.325 woodys and lost 10 mph on the gun
Name: thomas
Email: thomaslkn@hotmail.com
Yamaha: Snowmobile
Year: 04
Model: rx1
Manufacturer: Other
Other: Others List
Product: Ex system 4 into 1
Replaced_or_Modified_to: exhaust
Remote Name: 209.4.254.174
I just installed one of the first"that i know of" 4 into 1 exhaust systems from jandjyamahamotorsports on my rx1. This thing is awsome.The pipe out let comes out right under the tail light.They have been working all winter on this system with the help from one of the biggest sportbike companys out west, they are starting to release them know.I cant believe some one finally came out with this system,it sounds just like a tuned R1 bike,this thing is turning heads!!!!
Name: JOSEPH
Email: KIMBAJOE@ADELPHIA.NET
Yamaha: Snowmobile
Year: 2002
Model: SX VIPER ER
Manufacturer:
Other: Others List
Product: BENDER
Replaced_or_Modified_to: exhaust
Remote Name: 68.65.186.169
WAS UP IN BRETTON WOODS, NEW HAMPHIRE LAST WEEK, HAVE A 2002 SX VIPER ER, HAD MOD'S DONE, BENDER TRIPLE PIPES,BENDER CLUTCH KIT, V-FORCE REED'S, WAS HAVING A GREAT DAY UNTIL I BLEW UP 2 CYLINDERS, SLED'S HAS LESS THAN 700 MILES, BROUGHT BACK TO THE DEALER WHO DID THE WORK, YAMAHA TOTALLY SAID IT WAS THE PIPE'S THAT MADE IT BLOW APART, I DON'T THINK IT WAS,I CALLED YAMAHA DIRECT IT TOOK A COUPLE OF DAY'S FOR THEM TO GET BACK TO ME, THEN ARE GOING TO DAY FOR THE 2 CYLINDERS, BUT I HAVE TO PAY FOR THE PISTON'S, THE DEALER WHO I DEALT WITH WAS GREAT ALSO, THEY ARE GOING THE WORK FOR FREE, THIS IS WHY I LIKE YAMAHA SO MUCH, AFTER THEY TORN THE MOTOR APART, THEY FIGURED IT WASN'T THE PIPE'S IT WAS SO COLD UP THERE THAT THE VIPER LEANED OUT AND SMOKED THE PISTON'S, SO IT'S LESSON LEARNED, I CAN'T BE HAMMERING IT IN WHEN IT'S THAT COLD, OTHER THAN THAT IT'S A GREAT SLED...........
Name: nicholas
Email: badboy146@yahoo.com
Yamaha: Snowmobile
Year: 1998
Model: srx 700
Manufacturer: Hauck Racing
Other: Others List
Product: clutch stage 4
Replaced_or_Modified_to: clutch
Remote Name: 68.119.162.14
i have a 1998 srx 700 with triple pipes all the way out a stage 4 hauck clutch it seems to be a little slow only can get 110mph and got passed by a formula 3 600 with clutch work done.. i need help to go faster for not a ton of money. thanks.
Name: Bradley
Email: bradsrx700@hotmail.com
Yamaha: Snowmobile
Year: 2004
Model: RX-Warrior
Manufacturer: Bender Racing
Other: Others List
Product: RX - Warrior Exhaust
Replaced_or_Modified_to: exhaust
Remote Name: 68.114.69.161
I installed the Exhaust system for the RX-1 & RX-Warrior. The insallation wasn't that easy. Had to remove the seat. The pay off was excellent. I have to louder exhaust system, and let me say that It is a real head turner.
Name: G Taylor
Email: taylorgt@onlink.net
Yamaha: Snowmobile
Year: 2004
Model: rx warrior
Manufacturer: Maxximum Performance
Other: FAST
Product:
Replaced_or_Modified_to: suspension
Remote Name: 64.25.164.131
the handling of this sled as for front end lifting is the shits on corners. I put ohlins on the front end to help eliminate this problem' which didn't make a difference. the carbs load up at bottom end when idling as for the carbs are not the same as last years rx1. the track works great but yamaha still needs to do some homework on this product. who ever has this sled im looking for some assistance as to correct this problem
Name: jason witts
Email: jwitts78@hotmail.com
Yamaha: Snowmobile
Year: 1998
Model: srx 700
Manufacturer: Maxximum Performance
Other: V-Force
Product: go go parts list
Replaced_or_Modified_to: engine
Remote Name: 216.220.240.15
i set my 98 srx up with a set of slp skis, 144 chisel tooths w/plastic backers, wiseco pro-lite pistons, v-force 3 reeds, bender cold-air intake w/sir box mod, geared and clutched. the sled is an animal. i think that it is great that i can make all my friends hate there sleds when we race. i soon plan on adding a set of transfer rods. the only thing better than winning by 15 sledlenghts is doing it in a wheelie. braap!!!!
Name: Fast Jim
Email: JIM@HOTMAIL.COM
Yamaha: Snowmobile
Year: 2000
Model: SRX700D
Manufacturer: Bender Racing
Other: Others List
Product:
Replaced_or_Modified_to: engine
Remote Name: 216.209.115.64
I RECENTLY PURCHASED THE TOTAL PERFOMANCE PACKAGE FOR MY SRX 700 FROM BENDER CANADA. I AM SO IMPRESSED WITH THE GAINS THAT I HAVE IN SPEED AND TAKE OFF. THE HEEL CLIKER CLUTCH WEIGTH WERE ALSO WELL WORTH THE MONEY. I NOW HAVE NO PROBLEM KEEPING WITH MY FRIENDS STAGE 2 TURBO RX1. BRING ON THE ARCTIC CRAPS AND DOO DOOS!!!
Name: Matthew
Email: Yamahaviper700@yahoo.com
Yamaha: Snowmobile
Year: 2002
Model: sx viper
Manufacturer: Bender Racing
Other: Others List
Product: Pipes, heads, clutch reeds, etc
Replaced_or_Modified_to: engine
Remote Name: 65.111.194.142
The bender triple pipes are awesome. The extra horsepower on the viper really makes it fly.....Dont go by what people might think....I know.... this baby flies!!! The heel clicker clutch kit works great if you have a dealer set it up. I added a set of mega power heads that seem to add better compression and more get up and go. Stock vipers will give those stock 800's a run for their money and 9 times out of 10 beat them. Bender also makes great parts for the rx-1 to make it run more perfect than it already does!!! Keep up the good work at yamaha and all the aftermarket performance manufactures that make those yamahas run even better.
Name: srx600
Email: redtailshark2000@hotmail.
Yamaha: Snowmobile
Year: 1998
Model: srx 600
Manufacturer: Other
Other: Aaen
Product: pipes
Replaced_or_Modified_to: engine
Remote Name: 64.223.247.83
the aaen srx triple pipes rock from low to mid range, gave me 4 mph on top. Also makes handling easier with 23 less lbs and sounds wicked. V force reeds make throttle response crisp. Bender steering pivot makes steering easier. Hauck boost bottle really pulls through midrange and adds probably 1 mph on top. Sled takes stock or slightly modified srx 700 any day.
Name: Derek Elias
Email: dkelias@gov.nu.ca
Yamaha: Snowmobile
Year: 1993
Model: Exciter II SX
Manufacturer: Bender Racing
Other: Others List
Product: TSS Struts
Replaced_or_Modified_to: suspension
Remote Name: 216.108.4.72
I raced an 1993 Exiter IISX sled in cross country back in 1993/94 season. The sled was fast, but the front TSS was like a pogo stick. Everytime I hit a bump, the front end would just shoot straight up. I had the TSS modified by installing Bender Racing Fox Struts which helped alot. Did any other SX owners have the same problem?
Name: eddie
Email: STEEDAX2@AOL.com
Yamaha: Snowmobile
Year: 2003
Model: SX VIPER
Manufacturer: Bender Racing
Other: V-Force
Product: Vip triple pipe kit
Replaced_or_Modified_to: suspension
Remote Name: 205.188.208.72
Bender offers the best pipes with the best fit.The kit is well balanced. Besides bolting on an extra 35hp. I spent a few hours setting up the rear suspension. To make sure that weight transfer would be corret for the 35hp up grade.Nothing worst then not being able hook up. I might found that a adjustable- ramp helix might be the way to go. Offered by shockwave its adjustable from 43 degrees to 53 degrees. Still waiting for reports on it first. Clutching, gearing and suspension setup is now the key.
Name: steve miller
Email:
Yamaha: Snowmobile
Year: 1998
Model: 1998 srx
Manufacturer:
Other: Others List
Product:
Replaced_or_Modified_to: engine
the ride could be better,other wise i really like this year and make of snowmobile
Name: yamiman
Email: Novak701@hotmail.com
Yamaha: Snowmobile
Year: 2002
Model: viper
Manufacturer: Bender Racing
Other: Others List
Product: pipes
Replaced_or_Modified_to: exhaust
WANT TO KNOW IF YOU CAN PUT A 121x2INCH TRACK INTO A VIPER AND IF SO WHAT DO YOU HAVE TO DO OTHER THAN DRIVERS AND IF ANYONE HAS A 151 KIT FOR THIS SLED I WILL GLADLY BUY IT THANKS
Name: blu magoo
Email:
Yamaha: Snowmobile
Year: 1998
Model: mtn. srx
Manufacturer: Hauck Racing
Other: Others List
Product: roller secondary
Replaced_or_Modified_to: engine
she shifts like a son of a bitch. a lot smoother back shift. easiest and one of best add on's.
Name: KELLEN PELLEY
Email:
Yamaha: Snowmobile
Year: 00
Model: mm 700
Manufacturer:
Other: Others List
Product:
Replaced_or_Modified_to: engine
This thing loves the fucking jumps hard landings tho can't seem to hold on when she bounces. so far i have gone 56 ft and ad 36 off a drift. she good in the snow as well.
Name: yamiman
Email: Novak701@hotmail.com
Yamaha: Snowmobile
Year: 2002
Model: VIPER
Manufacturer: Bender Racing
Other: Others List
Product: triple pipes
Replaced_or_Modified_to: engine
I HAVE A PROBLEM WITH MY EGT TEMPS RUNNING 1250 DEGREES AND ABOVE I HAVE DONE EVERYTHING TO IT FROM THE REAR EXCHANGER HEAD GASKET HEAD MOD NOW I HAVE 170 MAIN ACROSS AND STILL RUNNING HOT ANY HELP WOULD BE GREAT
Name: Jim Wissmiller
Email: jameswissmiller@hotmail.com
Yamaha: Snowmobile
Year: 2003
Model: RX-1 136"
Manufacturer:
Other: FAST
Product: M-10-ohlins& jack
Replaced_or_Modified_to: engine
Put ohlins up front.ER roller secondary -911 frt cover W/speed shive up frt.136" m-10 w/ohlins on rear.I believe the long track relieves the weight up front on this sled and makes it handle like a dream.Also running dooley wear bars-6" on skis. No darting period.
Name: DAN TATU
Email:
Yamaha: Snowmobile
Year: 2000
Model: SRX
Manufacturer: Hauck Racing
Other: Others List
Product: SPEED SHEEVE
Replaced_or_Modified_to: engine
SPEED SHEEVE WORKS VERY WELL WITH #4 CLUTCH KIT. 89A WEIGHTS
Name: Jim Butcher
Email: jtbutcher1753@msn.com
Yamaha: Snowmobile
Year: 2003
Model: RX-1 Mountain LE
Manufacturer:
Other: PSI
Product: Whiteknuckle Performance
Replaced_or_Modified_to: exhaust
I purchased the QC-1 exhaust system from Whiteknuckle Performanc last year and have a little over 500 miles of riding with it on my sled. This exhaust system has a great sound and shaves 11 lbs off the total weight. Arne is a great person to do business with and treats his customers verry well. He gave me suggestions for jetting changes for the exhaust for the elevetion I ride at. I would recomend doing business with this company and wouldn't hesitate to purchase another exhaust system from them again.
Name: Roy
Email: trkimprtcars@msn.com
Yamaha: Snowmobile
Year: 1999
Model: Mountain Max
Manufacturer: Other
Other: Others List
Product: Airbox Mod/Silencer Mod
Replaced_or_Modified_to: engine
I did both the airbox mod and the Silencer mod on this machine and it really brought out the life. She runs close to what my friends 1999 MM700 runs with pipes and sounds awesome!!!! I am installing Mountain Performance Slide rail kit and slp pipes right now...can't wait to ride!!!
Name: Addison
Email: pwilbert@rr.com
Yamaha: Snowmobile
Year: 2004
Model: SXvenom
Manufacturer: Other
Other: Others List
Product: Pipes and clutch
Replaced_or_Modified_to: exhaust
This sled I have not rode yet but I have start it a couple of times and I can't get over on how sweet the sound is it makes me want to drive it right there, done by Simon CPR, I am waiting for the snow to fall.
Name: Scott Flynn
Email: peakperf@msn.com
Yamaha: Snowmobile
Year: 2003
Model: RX1
Manufacturer: Hauck Racing
Other: Others List
Product: Clutch Kit/ K&N filters
Replaced_or_Modified_to: engine
Hauck clutch kits work great! Goes right to 10,200 RPM and will destroy a stock RX1. K&N kit not only sounds awesome but runs extremely crsp.
Name: mike dillman
Email: dman@uti.com
Yamaha: Snowmobile
Year: 2002
Model: sx viper er
Manufacturer:
Other: SLP
Product: performance pipes
Replaced_or_Modified_to: exhaust
The pipes sound really good and not too loud. I have not been able to ride the sled though. Can anyone help me with a problem? I had to eliminate the battery because the silencer is where the battery mounted. Now, the digital readout and the tach is not working. Can anyone tell me what is wrong?
Name: n4aride
Email: dryden02@adelphia.net
Yamaha: Snowmobile
Year: 02
Model: viper
Manufacturer: Other
Other: SLP
Product: trip pipes
Replaced_or_Modified_to: exhaust
the pipes are awesome,if you dont set it up like slp or max perf says to.many frustrating hours of clutch tuning payed off.
Name: TO FAST FOR YOU
Email:
Yamaha: Snowmobile
Year: 1999
Model: SRX 1000 BIG BORE
Manufacturer:
Other: Others List
Product: PRICE PERF.
Replaced_or_Modified_to: engine
SLAPPED THE 1000 BIG BORE FROM PRICE PERF. IN THIS PUPPY AND DOES SHE EVER HOWL. PROFESSIONAL CLUTCHING, JETTING, ETC. DONE ON HER. INSTALLED MAXXIMUM QUICK RODS AND 244 ICE-PICKS TO MAKE THIS BITCH STAND UP, AND THAT SHE DOES. RUNS 138 MPH ON RADAR DOWN THE RIVER ON A WARM DAY. THIS SLUT OUTRUNS THUNDERCATS, F-7'S, MACH Z'S, RX-1'S, EVEN THE Fricken COPS, YOU NAME IT, SHE'LL BEAT IT. THERES ONLY ONE THING THATS WRONG WITH THIS, THE GIRLFRIEND THINKS I'M GOING TO KILL MY SELF AND SAID I SHOULD CHOOSE BETWEEN HER AND MY SLED!!! I'M GOING TO MISS THAT GIRL. AH-WELL, THATS MORE MONEY PUT TOWARDS THE SLED. AND FOR ALL YOU CHALLENGERS I DO RACE FOR CASH, PINKS, WOMEN, AND MOST OF ALL BEER. THATS IF YOUR WILLING TO CHALLENGE ME AND MY BLUE BEAST.
Name: Buzz Madge
Email: buzz_madge@hotmail.com
Yamaha: Snowmobile
Year: 1997
Model: vmax sx 700
Manufacturer: Hauck Racing
Other: Others List
Product: Hauck
Replaced_or_Modified_to: exhaust
The exaust system is excellent i fell alot of power with the triple pipes, but i can't figure out what jetting sizes to run, once it gets warm it runs good from 0to180 but as soon as i let the gas of and hit about 140km and then punch the gas back down it kind of boggs and doesn't go faster it stays the same. Off the topic my belt squeels badly and i can't figure out what to do i lined the clutches up exactly (well i think) and it still squeels i feel like burning the snowmobile i have put $2000 under the hood this winter and this is all i have let to do , PLEASE HELP thanxs any answers will be appreciated.
Name: jonny s
Email: jonnybravo_pos@hotmail.com
Yamaha: Snowmobile
Year: 1996
Model: vmax
Manufacturer:
Other: SLP
Product: twin pipes with stinger silencers
Replaced_or_Modified_to: engine
not to bad helped alot when v force reeds were installed that brought out the pipes mid range now kicks ass
Name: greg zoll
Email: gzoll@grangernet.com
Yamaha: Snowmobile
Year: 1998
Model: XTC 700
Manufacturer:
Other: Others List
Product:
Replaced_or_Modified_to: clutch
Ohlins factory team shocks, way to stiff but never fade. HI-TECH secondary works well, very adjustable. 1 1/4 camo being replaced by 1 1/2 camo for this season. Reed spacers, RAD valves, and thin head gasket. Some primary problems, but other wise great sled.
Name: HUFF
Email: huffman@primus.ca
Yamaha: Snowmobile
Year: 2002
Model: viper
Manufacturer:
Other: Others List
Product: triple pipes from speedworks
Replaced_or_Modified_to: exhaust
I love my Vipe but I need the speed.I have heard some good options are T-pipes from speed wurx or jaws performance.156 horse claimed from speedwurx on a stock sled.Any knowledge is appreciated.Keep in mind I don't want the noise and speedwurx claims they are quiet.What ever they're quiet is.Thanks and keep in mind I ride in plenty of snow up here in Northern Ontario so i don't believe over heating will be a concern.I don't want a mod rod.
Name: DAVE KAST
Email: KKAST@CPBU.COM
Yamaha: Snowmobile
Year: 99
Model: SRX 700
Manufacturer: Hauck Racing
Other: Others List
Product: STAGE 4 CLUTCH KIT
Replaced_or_Modified_to: clutch
VERY GOOD . IT WAS A PLEASURE TO DO BUSNESS WITH THIS COMPANY. HELPED ME OUT ALOT ON THE TELEPHONE. WOULD DO BUSNESS AGAIN WITH THEM. ROETIN STUD COMPANY WAS GREAT. TALKED TO THEM AT NOVI SNOW SHOW. E-MAIL ME IF YOU WANT RADAR GUN RESULTS FOR RUNNING ON ICE.
Name: jeremy
Email: jewbugb@aol.com
Yamaha: Snowmobile
Year: 2000
Model: srx 700
Manufacturer: Bender Racing
Other: Others List
Product: tranfer rods,bender can
Replaced_or_Modified_to: clutch
this thing sounds awesome & was able to change the transfer rods very easily right on the trail.(again i love the sound of thebender can)
Name: Robert Dawe
Email: rob@robertdawe.ca
Yamaha: Snowmobile
Year: 2002
Model: mountainmax700
Manufacturer: Bender Racing
Other: Others List
Product: Triple Pipes
Replaced_or_Modified_to: engine
Love the power these triple pipes make but not the sound, the stock pipe with a MBPR silencer sounds much nicer
Name: Shawn Nelson
Email: snelson@motiontech.com
Yamaha: Snowmobile
Year: 2003
Model: Mtn Viper
Manufacturer:
Other: Others List
Product: Hood
Replaced_or_Modified_to: body/skis
I put a lightweight hood on my sled (homemade) for mtn riding and I was amazed at how much better it would sidehill. I figure the reduced mass on top of the sled was the reason. So if you are condisering one I say it is worth it.
Name: cooper
Email:
Yamaha: Snowmobile
Year: 98
Model: srx
Manufacturer:
Other: Aaen
Product: pipes
Replaced_or_Modified_to: engine
havent installed them yet